The purpose of this section is to understand the basic steps involved in Computer Aided Manufacturing
(CAM) using Fusion 360 platform and create a NC code / gcode file.
Helpful tutorials:
1. Fusion 360 CAM tutorial on Solidprofessor
2. Fusion 360 CAM basics: https://www.youtube.com/watch?v=VEuD31byPxk
3. https://www.youtube.com/watch?v=Bd6–BQUCbVA (gcode/NC code instructions near the end
of the video)
4. Fusion 360 CAM tutorial for beginners: https://www.youtube.com/watch?v=Do_C_NLH5sw
There are many other tutorials on internet, you can refer any.
Required task:
• For the same part as shown on the previous page, generate a NC code/gcode for a milling
operation. If you think additional operations are needed, feel free to use them. No penalty for
selecting other operations.
• Submission for this section:
o Submit
▪ One screenshot of design tree (on same submission file as previous)
▪ One screenshot of each tool path you are using for a specific operation in CAM (on
same word file)
o Submit the NC code/gcode file (separate from pdf)
• There will be no pe